| | |
 | Stainless Injector with couplings - WS200
High quality stainless steel foam injector including stainless steel quick couplings. Dosage orrifice plate at required % and blue or red pick up tube and strainer.Part No - WS200 (Different orrifice plates are available in the spare parts sub-section)
Price: £149.00 (Excluding: VAT at 20%) |
|
|
Stainless Steel Foam and chemical Injector (without couplings) - WS135
Price: £135.00 (Excluding: VAT at 20%) | |
| High quality stainless steel foam injector with 3/8" male connections. Injector comes with 1 orifice plate set at the chosen % dilution, 1.5mtr (blue or red) inlet pipe and strainer. (NO COUPLINGS) Part No - WS135 (Different orifice plates are available in the spare parts sub-section)
|
|
Foam injector with by-pass - WS989
This unique assembly comes complete with a wall bracket, to become a permanent fixture at the outlet point of any low, medium or high-pressure system. The stainless steel injector is included and is by-passed via the lever valve. This will allow increased water flow for rinsing off and prevents undue water from passing through the injector, increasing its life span. It comes as standard with 3/8" or 1/2" male inlet and outlet for connection of quick couplings. Part No - WS989
Price: £249.00 (Excluding: VAT at 20%) |  |
|
|
 | 3% Foam Injector complete - WS062a
For use with a foam lance for the production of foam. Dosage rate fixed at 3%. Includes quick couplings and pick-up tube and filter. Part No - WS062a For other connections/couplings on the unit please contact us.
Price: £39.00 (Excluding: VAT at 20%) |
|
|
High pressure Injector - WS558
This brass/stainless injector works without dropping the pressure at the nozzle. Can be used with a standard high pressure lance on any flow rate up to 75 litres per minute. Adjustment is required on site - simply turn the brass screw head clockwise until suction is achieved. Turn the stainless screw head to adjust dosage of chemical. 40% of the water is by-passed within the injector to create suction of the chemical - as a result the pressure at the nozzle is 60% of the normal working pressure. Part No - WS558
Price: £97.00 (Excluding: VAT at 20%) |  |
|
|
 | ALTO foam and chemical Injector - 6401244
Alto foam injector, adjustable dosage 0-5%Part No - 6401244
Price: £69.00 (Excluding: VAT at 20%) |
|
|
Chemical injector complete <15 ltr/min - WS061
Chemical Injector complete with suction pipe and filter.This model is suitable for use on high pressure equipment with a flow rate of 11 to 15 litres per minute - for the application of chemicals. (Will not work when used with a foam lance). Max pressure 250 bar. Max Temp 90 C. Part No - WS061
Price: £28.50 (Excluding: VAT at 20%) |  |
|
|
| | Chemical injector complete >15 ltr/min - WS061a
Chemical Injector complete with suction pipe and filter.This model is suitable for use on high pressure equipment with a flow rate of 15 to 20 litres per minute - for the application of chemicals. (Will not work when used with a foam lance). Max pressure 250 bar. Max Temp 90 C. Part No - WS061a
Price: £28.50 (Excluding: VAT at 20%) |
|
|
Twin foam/sanitising injector - WS770
This wall mounted unit has two pick ups for dual chemical application. The desired option is selected by operating the lever handle. Each chemical has independant dosing via orrifice plate for precise results.Part No - WS770
Price: £340.00 (Excluding: VAT at 20%) |  |
|
