My Cart

Items Ordered:  items
Cart Value: 

Chemical dosing equipment

Dema blend centre 1 gpm - WS868

Dema blend centre 1 gpm - WS868

Price: 85.50 (Excluding VAT at 20%)

Dema proportional blend centre precisely dispenses detergents and chemical with water. The dosage rate is determined by the interchangeable colour coded tips which are screwed into the detergent pick up line. At the push of a button this unit will dispense 1 gpm of premixed water and detergent. See below for the 4 gpm unit.

Part no - WS868

Dema blend centre 4 gpm - WS869

Dema blend centre 4 gpm - WS869

Price: 88.00 (Excluding VAT at 20%)

4 gpm Dema blend centre.

Part No - WS869

Minimix dosing system 5 lpm - WS798

Minimix dosing system 5 lpm - WS798

Price: 129.00 (Excluding VAT at 20%)

Minimix is a dosing unit for exact dosing of chemicals into water. The unit has a max pressure rating of 10 bar and is most suited to mains water supplies (min 2 bar). A metering tip is entered into the pick-up pipe to allow dosage of chem between 0.15 to 8 %. Approved for water supply legislation. This unit is suited for a flow rate of 5 Lpm. Max temp 60deg C. Part No - WS798


Minimix dosing system 12 Lpm - WS799

Minimix dosing system 12 Lpm - WS799

Price: 136.00 (Excluding VAT at 20%)

Minimix is a dosing unit for exact dosing of chemicals into water. The unit has a max pressure rating of 10 bar and is most suited to mains water supplies (min 2 bar). A metering tip is entered into the pick-up pipe to allow dosage of chem between 0.15 to 8 %. Approved for water supply legislation. This unit is suited for a flow rate of 12 Lpm. Max temp 60deg C. Part No - WS798


P203 low pressure chemical dosage injector - WS802

P203 low pressure chemical dosage injector - WS802

Price: 41.50 (Excluding VAT at 20%)

A low pressure unit suitable for injecting chlorine, sanitiser and other chemicals with water pressure from 40 psi (3 bar) up to 125psi (8 bar). Minimum flow rate 12 lts per minute.

The dosage rate is adjusted with a selection of orifice tips inserted into the chemical inlet point.

3/8" male threaded body, comes complete with suction tube, weight and filter.

Part No - WS802

205 ltr Barrel pump - WS771

205 ltr Barrel pump - WS771

Price: 19.75 (Excluding VAT at 20%)

Plastic siphon drum pump suitable for 205 ltr drums. Polypropylene - suitable for oil, acids and alkali's. Complete with 1m delivery pipe. Part No - WS770


Recently Viewed